Two-Position Turntable
The 3/4-inch top plate withstands fork truck abuse and enables this turntable to position 2,000 to 16,000-pound loads (8,000 pounds per side)
at a workstation, to speed assembly operations. The foot valve control is separate from the turntable for safety and efficiency, activating a 180-degree rotation with each actuation. The turntable rim underside has a special labyrinth edge protect the air bearing, which uses 60 to 85 psi air at 45 to 75 scfm.
See Application Solutions for a two-position turntable that not only rotates, but lifts for work-level positioning.
Two-Position Tilt Turntable
See Application Solutions for one example of the production improvement achieved with a tilt turntable. These can position 2,000 to 16,000 pound loads and tilt them for ergonomic efficiency, minimizing workstation dwell time and worker injury risk. Various tilt angles, corner braces for pallets or bins, and other custom details can fit your operation exactly. Contact Airfloat to put 40 years' air bearing and material handling experience to work for you.
Four-Position Turntable
This table which can position up to 4,000-pound loads for optimum ergonomic positioning.
Airfloat turntables have specially-developed urethane air bearing material, attached to a corrosion-resistant steel back place with a rolled edge seal, for maximum strength. Position dividers are available.
Four-Position Tilt Turntable
See Application Solutions for the precise ergonomic positioning obtained
with the specially-developed pneumatic air stroke tilt actuator. There is a built-in maintenance safety prop for tilt maintenance. Loads up to 4,000 pounds per position can be positioned.
Round Low-Profile Turntable
This turntable is specially designed to be low to the shop floor for
rotating loads from 6,000 to 12,000 pounds. The proven Airfloat design incorporates features that make for safe, reliable turntable operation for years.
Round Flush-Mount Turntable
This Airfloat design is only 2-1/2-inches tall and can be mounted in the
floor or on top of the floor. Position loads weighing 2,000 to 12,000 pounds.
Square Flush-Mount Turntable
This 2,000 to 12,000-capacity turntable is only 2-1/2-inches tall and can
be mounted in the floor or on top of the floor. The foot valve control can be located in the most efficient location.
Round High-Load Turntable
Position heavy loads weighing 24,000 to 90,000 pounds with this Airfloat
proven product. The 1-1/4-inch or 1-1/2-inch-thick top plate includes Airfloat's reliable labyrinth edge design. Airfloat quality features like the specially-developed urethane air bearing material and fabrication of structural steel shapes assure you long, reliable operation.
Robotic Interface Turntable
This
Airfloat design is an integrated component of a robotic
destacker system that handles 48-inch by 86-inch blanks. The
turntable base is mounted on four sets of wheels to match
an existing track system. The turntable diameter
is 15 feet; base diameter is 13 feet. There are
three pallet loading stations, each having a 12,000-pound
capacity with 18-inch load height. Airfloat works
with you to solve material-handling challenges of any
size.
Rotating Assembly Line
Airfloat can design a 44-foot-diameter flush floor table complete with curb
ring for flush-to-the-floor installation. Choose open or closed center, steel or wood decking, wheeled or air-bearing support, buss connection for power, and fixturing to fit your needs.
Turntables Video
Click on the image below to watch a short video demonstrating a 28-foot turntable with 4 inset, 8-foot turntables with a 3 in. stack height.
*player will open in a pop-up window.
Click on the link below for a larger format, .wmv file, viewable in Windows Media Player.
28-Foot Turntable with 4 Inset, 8-Foot Turntables with a 3 in. Stack Height
